BioGel

 

Gravel and similar porous and irregular material used in the footings of transformers, oils storage bunds, railway lines, etc. are almost impossible to clean after contamination with spilt oil.
The only effective method is to eliminate the unsightly and environmental effects of oil spillage on these surfaces is to excavate and remove the contaminated material. A task that is both time consuming and expensive.
   

The Solution

Use a biological oil stain remover that:

Degrades and digests oil contamination in situ.
Reduces oil spillage to carbon dioxide and water.
Is without risk to the environment.
Bio Gel

A unique, biological product that contains oil specific bacteria in a ready to use aqueous gel.
Bio Gel is easy to apply and completely biodegradable

 

How to use Bio Gel

Pour Bio Gel over the contaminated area and gently spread with a brush or scraper to cover evenly.
Keep the treated area moist for 48 hours, either by covering with a plastic sheet or gently spraying intermittently with water.
If Bio Gel dries out prematurely, reactivate by applying Nutrient 2 Liquid via a spray or watering can.
Allow up to 30 days to achieve effective treatment.
Apply a second treatment, if necessary, on badly contaminated areas.

Recommended dosage

Use 1 Litre of Bio Gel to treat 1-6 square feet ( depending on surface roughness) of contaminated area.

Approvals

Registered in Germany as an environmentally acceptable cleaning agent with the Umwelt Bundes Amt(No.'s 3406-0002.)

 

 

Fill out the online form for more information
Back To Home