OT8

 

Car parks, blocked paving and concrete drives, contaminated with vehicle oil stains are unsightly and could create hazard when left untreated.

The removal of oil stains with traditional degreasers, particularly on porous block work, is extremely difficult and usually results in the oil stain extending to adjacent areas
   

The Solution

Use a biological oil stain remover that:

Removes and digests oil stains quickly.
Penetrates and lifts oil from porous surfaces effectively.
Is without risk to the environment.
OT8
A unique biological product that contains biodegradable surfactants to release oil stains from even the most porous surfaces, and enzymes and bacteria to digest the released oil.
How to use OT8
Before use, shake the container to put the bacteria into suspension.
Lightly wet the contaminated area with water and pour OT8 across the oil stain.
Brush OT8 into the oil stain for one or two minute, until the product changes colour from white to chocolate brown

Leave for 20-30minutes to soak in, then rinse off with water.

A second application may be required on porous surfaces, where oil stains may re-appear as OT8's biological activity brings the ingrained oil to the surface.
1 litre of OT8 will be sufficient to treat 10-25 square feet of oil stains depending on surface porosity.

Note

OT* is not suitable for use on Tarmac surfaces.

Approvals

Registered in Germany as an environmentally acceptable cleaning agent with the Umwelt Bundes Amt(No.'s 3406-0001.)

 

Fill out the online form for more information
Back To Home